The BEST General Engineering in Coral Cove QLD

All Quality Engineering provides a large number of engineering and machining services. We have over 30 years of experience with engineering and machining in commercial, rural, industrial and marine industries. All Quality Engineering specialises in fixing things so they stay fixed. We provide consulting services to diagnose faults, identify modes of failure and then provide an engineering solution. We are also happy to provide consulting services for DIY (do it yourself) repairs. All Quality Engineering has one of the largest manual lathes in the Bundaberg region. It is used to re-surface small gauge railway rolling stock and can handle jobs up to 3.5 tons. It can perform typical turning operations including facing, tapering, chamfering, drilling and boring on large work pieces. We also have two smaller lathes so we cater to a complete range of job sizes from the very large to the very small. Tolerances of +/- 0.01mm can be achieved with our equipment. Turning Capacity Cylinders: 620mm Dia x 3000mm Len Disks: 1300mm Dia x 300mm Len Shafts: 105mm Dia x 6000mm Len We have a large manual universal mill that can handle jobs up to 1 ton. It can perform typical machining operations including facing, profile cutting, pocketing, slot and dovetail cutting, boring, keyway and spline cutting. Centre alignment of +/- 0.1mm and dimensional tolerances of +/- 0.01mm can be achieved with our equipment. Single Setup Milling Capacity These are the dimensions that can be covered from a single datum reference. X Axis: 1300mm Y Axis: 650mm Z Axis: 400mm We provide specialised welding of stainless steel, aluminium, cast iron, bronzes, steel, high tensile steels and tool steels. We provide tungsten carbide chip hard facing services for ground engaging equipment. This treatment can dramatically cut maintenance and replacement costs. We have 15 years of experience repairing and optimising propellers, shafts, marine bushes, seals and bearings.