Splashbacks are one of those things that always look great in the showroom, but quickly become dirty and grimy from food splatters and general use.

Fortunately, you can use a few simple methods to get your glass splashbacks looking like new again.

Bleach

One of the best ways to clean a glass splashback is by using bleach. Make sure you always use protective gloves when doing this, because although bleach is very effective at killing mould and bacteria it does have its hazards. To clean your glass splashbacks with bleach mix up one part chlorine in four parts water in a spray bottle. Spray the area down and leave for 10 minutes before wiping off with a damp cloth or sponge to reveal a sparkling shine. Rinse thoroughly and allow to dry completely before re-installing in the kitchen. Bleach may be effective but it can also be corrosive so make sure you take great care not to allow it to come into contact with fixtures or fittings. It should also be noted that you shouldn't use bleach on glass splashbacks if it's been treated with an anti-fog solution as this could cause the chemicals in the product to bubble and blister, allowing water to seep behind it which can then lead to more serious problems for your walls and flooring.

Salt and white vinegar

Another good way to clean glass splashbacks is by using salt and white vinegar. To do this simply mix up a solution of one part salt in two parts white vinegar, creating a paste that you can apply to the area with a cloth or sponge to clean glass splashbacks. Rinse off thoroughly once it has been allowed to sit for 10 minutes before rinsing again with water and seeing how much difference it has made compared to other methods. The combination of salt and vinegar is also great at getting rid of bad odours coming from your kitchen so if your glass splashback have started smelling after cooking strongly flavoured foods then give them a quick polish with this method with a lint-free cloth afterwards just to ensure they stay fresh smelling. If you're looking for a little extra cleaning power you can add a half cup of bicarbonate of soda to the mix, which will help grind away stains and marks with a lint free cloth.

Use vinegar and baking soda

Finally, if none of these methods makes your glass splashback sparkle like new again then it's time to give up on that expensive purchase and buy yourself a replacement. There are lots of great deals available online where you can choose from various styles and finishes while still paying much less than you would in a hardware store or specialist manufacturer's shop. Another great advantage of shopping online to get a good quality glass cleaner is that you can read product reviews before buying the glass cleaner, helping to narrow down your choices and avoid any mistakes and choose one that promises a streak-free finish.

How do you clean glass splashbacks without streaks?

The best way to clean glass splashbacks without streaks is to use an ultra-fine polishing pad with a product that has been developed for this purpose and a non-abrasive cleaner. There are many different brands available so try looking at reviews before committing to one purchase, as some may be better than others depending on your situation. While you can buy these pads from hardware stores they are often situated in the same area as abrasive cleaning products, meaning it's easy to pick up the wrong thing by mistake, which could actually damage your glass surface further.

If you're lucky enough not to have any stubborn stains or marks that won't shift then all you'll need is a simple spray cleaner or glass cleaner for regular cleaning with a lint-free cloth or paper towel between more intensive sessions. Just look out for 'streak free' on the label and clean the entire glass splashback to get a streak-free finish with a non-abrasive cleaner. To clean splashbacks, practice a bit of patience too. One you have that sorted, give your glass pool fence a once-over

How do you clean a mirror backsplash?

To clean a mirror backsplash simply spray the area down with tap water and soapy water with a spray bottle (which is much easier than cleaning a splashback made of tiles!) and wipe away any dust or dirt with a lint-free cloth or paper towel with soapy water or tap water. For stubborn marks you can use window cleaner with a clean cloth, allowing it time to dwell before wiping off. Don't use too much force as this could cause damage to your mirrors, be gentle and let the soapy water do its work. Always use a non-abrasive cleaner to get a streak-free sheen and avoid unsightly streaks. Clean in a circular motion, avoid scratching because this will help in removing stains. For a kitchen splashback you can also use methylated spirits, dry cloth, lemon juice and distilled water to clean the splashback regularly. Allow it time to work rather than scrubbing at the glass like mad to make the glass splashback clean. Abrasive cleaners can create unsightly streaks that are visible in direct sunlight and make your houses big style feature look shabby.

How do you get grease off a glass splashback?

The best way to clean a glass splashback that is covered in grease is to mix up a solution of half water and half white vinegar, using a spray bottle apply it to the area and allow it to sit for 10 minutes before rinsing off with warm water or using a soft lint-free cloth or a soft clean cloth. The vinegar will help cut through the grease while being gentle on your glass, which is important as many cleaning chemicals are too strong for glass surfaces. You can also use baking soda mixed with a little bit of water if you don't have any vinegar available. Even toughened glass can get bad grease stains in your kitchen splashbacks. Just clean splashbacks made of glass or even a stainless steel splashback with a white vinegar solution, non-abrasive cleaner, paper towels, hot soapy water, and one part lemon juice. Gently rub the non-abrasive cleaning product to get a shiny surface for cleaning glass. Stone splashbacks and acrylic splashbacks might need some extra effort. a few things you can do to clean splashbacks is to use a dry cloth to clean grease even on tough stone splashbacks or acrylic splashbacks.

How do you remove burn marks from glass?

To remove burn marks from the glass you need to sand away some of the damaged material, which is best done with wet sanding. A specialist product will be easier on your glass than sandpaper, but not all tiles are made using tempered glass so it's important to take extra care if attempting this at home. You can use medium grade sandpaper or steel wool dipped in water for tougher marks and an ultra-fine pad for lighter damage. If you don't have any options available then simply scrubbing at the area with cleaner and a damp cloth should do the trick.

How do you clean an acrylic splashback?

The best way to clean an acrylic splashback is to use a specialist product that will break down grease and stains without being too harsh on your tiles. If you don't have any around the house then covering the area with kitchen roll before spraying it with water should give you similar results. You can also use white spirit or vinegar, but these are much stronger so only use them as a last resort. You also might wish to try using a magic eraser or similar scrubbing pad on acrylic surfaces with a damp cloth, as these are designed to be used without water. You don't need proper glass splashback learning for cleaning splashbacks.

How do you clean a tiled splashback?

The best way to clean tile splashbacks is with white vinegar and baking soda. The combination of these two ingredients will be strong enough to remove any stains or marks without being too harsh on your tiles, which could cause them to discolour over time. Simply mix up a solution of equal parts water and vinegar, apply it to the area with a soft cloth before covering it in baking soda. Leave it for around five minutes then scrub away at the stains with your cloth until they disappear. Try to avoid abrasive cloths and work your way through with lint-free cloths. To avoid these issues you can use window cleaner which doesn't contain any chemicals that may leave marks on your flooring, however, if you're doing this every day then buying some specialist cleaner might save you money in the long run!

How do you get stains out of a splashback?

The best way to get stains out of your glass splashbacks is by scrubbing at the area with hot water and some washing up liquid or baking soda with lint-free cloths. Mix up a solution of half water and half white vinegar, apply it to the glass splashbacks then use an old toothbrush or magic eraser to remove any stubborn marks that are left behind. For oil-based stains, you can also use a solution of cream of tartar and white wine vinegar, which should be applied in the same way on the glass splashbacks.

How do you fix a melted splashback?

If your splashback has become warped or melted then it's likely that it was exposed to a large amount of heat for too long, which could have caused the tile adhesive to break down. The best way to fix this is by removing the tiles one by one using a scraper before reattaching them using new adhesive. What ever you do, stay safe while cleaning to avoid any injuries. Here's a few outlines from Worksafe Queensland you can follow.