Some plumbers can perform these types of jobs, but it depends on your specific needs.
A bathroom vanity is designed for cosmetic purposes and often includes a sink, mirror, and vanity cabinet. It's usually installed against a bathroom wall.
In most cases, if you ask a plumber to install a bathroom vanity, they will do it. However, keep in mind that this is a skilled trade and asking them to use their skills outside their expertise would not be appropriate or safe for either party. If there is no drain set up for the sink yet, have one installed first before bathroom vanity installation. This ensures ease of plumbing and correct placement of the sink itself.Most plumbers might refuse to install vanities due to their lack of training and skill set required to complete such an installation. The best option for such a project would be to hire a licensed and insured cabinetmaker or carpenter who has experience with bathroom vanity cabinet installations.
Plumbers do not customarily install vanities, but they could be hired to do the work under specific circumstances. A plumber will very likely need assistance from an outside source like a general contractor in order to successfully accomplish such a task. It is possible that those offering bathroom renovation and installation services and other plumbing work may also offer bathroom vanity installations and bathroom vanity plumbing installations as well.
For best results, it's always best to contact general contractors first before searching for a plumber when you want to install a bathroom vanity, or adjust an existing vanity. Remember, dealing with plumbing fixtures, plumbing pipes, and other plumbing issues is only a small portion of the work involved when you install a bathroom vanity.
The professional or professionals you speak to will need experience with carpentry work, including the ability to supply and work with tools like a hammer drill, measuring tape, and so on. These carpentry skills will help them complete the job quickly, as soon as possible, and a general contractor is your best bet when looking for someone with this skillset. Additionally, if necessary, they can always hire a plumber to work under them, so you get the best of both worlds.
Keep in mind that pricing differs from plumber to plumber, to ask whether drainage installation is covered along with sink installation. If you shop around for quotes a bit, you may be able to find a professional who does cover it.
A plumber is able to install a new sink in your bathroom as long as the project does not require any hazardous areas. Plumbing is all about installing and hooking up fixtures which include sinks as well as: sinks, vanities, faucets, toilets, bathtubs, and more. Plumbing also involves setting up pipes for drainage purposes.
Plumbers are able to install bathroom sinks as long as the job does not require any hazardous areas.
In order to install bathroom vanity plumbing and replace an old vanity with a new vanity, you'll first need to remove any existing bathroom vanity you may have. Even if you're not installing a new vanity, you'll need to move the old vanity out of the way so that you can work without any issues.
You may also need to run some new plumbing lines from the floor waste and vent above it. This is not always as easy as it sounds since they may be old and corroded and they may also not be easily accessible or they might not even exist anymore. You will want to hire a licensed plumber with experience in this area for the best results. They will start by removing the old tailpiece, clean up any corrosion and debris.
They will then determine where to cut into the floor or the wall back panel to route new P-traps for both the bathroom vanity sink as well as the lavatory fixture. Since there are many variables involved when determining whether to use the wall or the floor, it's best to have a plumber who specialises in this area take care of it for you. This is because he can use the right tools to minimise any damage to your wall, flooring, and other fixtures. Additionally, he knows exactly what type of piping to use based on your local plumbing code and makes sure that everything works properly once the vanity is in. The final step is filling out any necessary paperwork for permits before turning everything back over to you.The job basically involves connecting all the bathroom fixtures together so waste can flow down into an existing sewer line. It also requires hooking up hot and cold water lines, venting for each fixture, and setting up traps.
If you are looking to install your own bathroom vanity plumbing using Pex tubing, it's important to note that most plumbers will not use Pex when they install bathroom sink drainage because it is more expensive than most other types of piping. However, if you already have the setup in place, then they will probably just use what is there since it would be wasteful to put in new copper tubing at this point for such a small job. The bottom line here is that usually, only large projects involving extensive re-piping will cause them to switch out plumbing materials without having to replace everything with galvanised or copper piping along the way.
If you're uncertain about how to handle the plumbing when you install a bathroom vanity, it's always best to contact a professional for help. Many online services will help you find the best fit for your needs, allowing you to filter out professionals who do not offer help with vanity plumbing, and also allow customers to book online, making the process as easy for you as possible. The New South Wales Department of Fair Trading has some great information about hiring contractors for these kinds of renovations.Remember, working in plumbing means dealings with things like water supply lines, water pipes, wall plugs, and more. You may need to use a hammer drill to drill access holes and will also need to be prepared to deal with any unexpected plumbing emergencies that may arise. Unless you're confident you can handle the whole process yourself, getting professional help ensures you don't make errors that will cost you a ton to rectify, and that your plumbing will be working properly once all the work is complete. While a professional will cost more than doing it yourself, you don't have to worry about major accidents or damaging other parts of your bathroom like your flooring, wall, or the countertop while you work on the plumbing.
When putting in a bathroom vanity, you will need to follow the below.
Make sure you have a supply of all the tools you need for the project.
Turn off the water and get rid of the water in the pipes by opening the faucet and flushing the toilet.
Remove sink and cabinet hardware and set them aside where they won't get damaged. Don't forget to remove all the items in your cabinets before doing this. Then remove the sink and store it somewhere safe as well (if you don't know how to do this, check out our article on removing a bathroom sink ).
Use a putty knife or flat-head driver to pry out your bathroom cabinet drawers and any other loose pieces you don't want to lose.
Put a bucket under the trap to catch the water that will flow out while you work. The reason you need to disconnect your sink from the plumbing is that next, you'll need to remove the drainage line that was connected to your old sink. This can be anything from a pop-up stopper to a double-handled faucet, depending on the type of sink that was there originally.
Now that the sink and cabinet are out of the way, you can work on removing the old drain trap. There will be a threaded fitting holding it in place which you should unscrew with an adjustable wrench. You'll want to take care not to damage anything since they may need to be reused.
Remove as much of the old P-trap as you can so you don't have any leaks when your new bathroom vanity goes in. Then use emery cloth or sandpaper to smooth down any rough edges so nothing gets torn up inside your new trap.
Attach a Y-fitting into the existing drainage line and attach one end of a length of PVC tubing into this (it should come adhesive already applied, but if not, you'll need PVC primer and cement).
Attach a 90-degree angle fitting to the other end of the tubing so it gets an unrestricted flow direction.
Down where the new P-trap connects with the main drainage line, cut out a notch so that sludge from your sink can continue to flow down without being blocked. Be sure to smooth this section as well since you won't want any leaks there either.
Slide a cleanout plug into one side of the Y-fitting near the bottom and a threaded cap onto the other since they aren't going to be used. This will also help prevent leakage at this point if anything should happen to slip behind your new bathroom vanity during installation.
Connect all bathroom sink lines according to your new sink's installation manual and use the appropriate PVC primer and cement for this project.
Re-connect all the hardware such as faucet handles, pop-up stoppers or sprayers, etc., making sure they are tightened down securely. Turn the water back on, check for leaks in your new drain lines, then turn it off again. Now connect the P-trap so you have access to both sink drains in case anything needs to be repaired later on down the road.